Thread: 302 cyl head print (needed!)

Tweet

I have no clue what c4 rebuild kit i should get. I'v never done a trans before.

Ya im a seinor in hs. I took independent study with my english teacher (only teacher available) and i just pick my project, design it, build it, and write about what i do each day.
I also had to write a ten page paper on manifolds vs. headers if you wanna look that over too... it was a real pain, and the teacher gave me a d+ on it, but a chance to rewrite it. So that is a big grade, so im adding stuff in as i go.

Originally Posted by Henderlong

I have no clue what c4 rebuild kit i should get. I'v never done a trans before.

Ya im a seinor in hs. I took independent study with my english teacher (only teacher available) and i just pick my project, design it, build it, and write about what i do each day.

So how do you have access to a 3 axis CNC machine?? Your High School has that type of equipment??

Originally Posted by rspears

So how do you have access to a 3 axis CNC machine?? Your High School has that type of equipment??

We have a small cnc router (wood), a bridgeport (havnt used yet), a small leathe, jigsaw, bandsaw, mig welder, and other basic tools.
But i duel enroll in a tech center, so i spend three hours at hs (ap calc, american lit, and indepent study), then i go over to the tech center for another 2.5 hours or so. - which we have a small machine shop, multiple welders, plazma cutter, torches, and other cool tools including car lifts.

Don't worry im not one of those spoiled rich kids

Originally Posted by Henderlong

Don't worry im not one of those spoiled rich kids

i was actually thinking you were a friend of MR wizzards .. he`s from your area also