Quote Originally Posted by Henderlong View Post
Yes, i def like the idea of welding on the inside (head side), then machining it down. Im not sure if i want to write a program to machine the welds down, or just put it in a vise, and use the bridgeport?

Yes, wood will be used to double check everything. plug clearence is a must, but shouldnt be a problem.

And im pretty sure i dont need to go all the way to tampa to cut this thing out. ha i live in michigan. allitle far? I dont need a lazer. a simple 3 axis machine should work dandy.

Ha idk about sanity... i'm pretty much doing this project on my own. I'm just using their tools ha. i have never done anything this big before. however im switching on and off with this and rebuilding a c4 trans that just blew out in my truck.

I'l try to finish up some tools to flare the pipe tonight, and u guys can tell me your thoughts on that.

You can rebuild that C4 in your spare time, they are about as simple as any to do - but a word to the wise, make sure you use HiPo parts to extend its life