Quote Originally Posted by sfort View Post
I think he is talking about the relation ship of the mounting bolts to the 1.9" dim.. They are not centered to the port. The ball pein and poster board is a good idea. Henderlong are you going to program a digital pattern into a water jet or laser?
Yeah, sfort I agree. I would put a bolt in the front & rear mounting holes on the head, run a good straight edge across the top & bottom of the bolt measuring to the respective port edges. Those measurements plus the bolt OD, all measured with a dial caliper will give him the offset within 0.001" or closer. I'd rather have the measurements from my head than the dimension from somebody's drawing.