Results 1 to 15 of 32
LinkBack URL
About LinkBacksThreaded View
-
06-24-2006 11:13 PM #9
CHR Member
- Join Date
- May 2004
- Location
- so.cal
- Car Year, Make, Model: 66 c 10 fleetside longbed
- Posts
- 1,942
The regulator and all the wires to the alternator unplug right out of the harness and this leaves #4(pic below) which is the brn wire ,which I am going to use to switch a relay on and off for the electric fan.All the other wires in the harness on the drivers side stays as in the diagram.
I was showing in the sketch only the what I was changing from the diagram.I understand ,kinda whats goin on now on the ignition side ,Wire it like the v-8 harnes,just remove regulator , alt wires and charge wire to main horn buss.Replace the removed wires with sketch.What was throwing me off was the floating ground and the fact that the diagram shows power to the ammeter from the hot lug on the solenoid full time,but ....I guess it stays on ,key on or key off??
Last edited by shawnlee28; 06-24-2006 at 11:47 PM.
Its gunna take longer than u thought and its gunna cost more too(plan ahead!)
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! - -
John Norton aka johnboy