Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree649Likes

Thread: Low-budget/T-Bucket Pickup
          
   
   

Reply To Thread
Page 9 of 28 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 ... LastLast
Results 121 to 135 of 414
  1. #121
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    I'm retired United pilot
    Driver50x likes this.

  2. #122
    36 sedan's Avatar
    36 sedan is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2012
    Location
    american canyon
    Car Year, Make, Model: 36 Ford Sedan, 23 T Bucket
    Posts
    1,899

    At the risk of controversies I've caused here in the past I’ll put my two cents worth in.

    As Jerry has stated, the tie rod ends may not be designed for the loads applied by your application. While you may be planning on a low horse power to weight ratio and skinny tires (no traction), a future owner may not. Always error on the side of caution, expect the unexpected, stay with commonly known practices when it involves safety. Safety with your vehicle build will not only include you, but future owners, and a safety issue could also effect innocent bystanders. While I’m a huge advocate of working on, building and driving our classic cars and having fun, I’m also a huge advocate of doing it safely. PLEASE do not cut costs or corners on safety.

    If you or others have concerns about critical product application, weld strength or other items on your car, don't speculate, check with the manufacturer and ask for their design sheets. If it’s a weld you have performed that has concerns, get it tested or go back to welding school until you're sure. It’s easy and the piece of mind alone is worth it (not to mention the life it may save). Remember, we only get one life, please plan accordingly. Be safe and live long.

    OK, I’m done…

  3. #123
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,709

    I'll throw in my 2 cents. While I would choose a heim joint just because they are common and easier for me, the tie rod end is going to be as safe as it gets. If a light load of a four link suspension is enough to shear a tie rod taper off, I think were all in trouble with using them on our steering. In the AG industry I've seen tie rod ends used in every angle holding many times the weight the rear end is ever going to see and they last for years and years. At the end they start getting a little loose just like any other joint will do with continued use. That's just what I see.
    40FordDeluxe and Driver50x like this.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  4. #124
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    Tie rods were designed for steering loads not vehicle acceration and stopping loads ----anybody that thinks you have as much force thru your steering wheel as compared to any v8 engine torque/hp ------------

    And-----in this install the weak/failute prone arae is where the end of the tie rod threads in the tube are-------
    techinspector1 and NTFDAY like this.

  5. #125
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,709

    Is there a difference in the threads of a tie rod end and a heim joint end ? If I remember right the ones I used were 5/8 fine thread where maybe a tie rod end is 1/2 fine. Maybe Driver will chime in with more details.
    Last edited by 53 Chevy5; 11-19-2017 at 08:17 PM.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  6. #126
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    Seth-Its not about the differance in the threads-------its about where the threds are screwed into the tube--------the failure will occur at the end of the threaded shank of the tie rod end in the tube-you are going from a solid amount of material to a thin tube that is weakened by the internal threads and that will create a weaker spot where the external forces on the link will cause the failure--------

    The tapered shank in a correctly tapered receiving hole will actually fit up better than just a bolt in single shear mount--
    NTFDAY likes this.

  7. #127
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

  8. #128
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,334

    Correct me if I'm wrong, but weren't heim joints originally designed for aircraft? I know a butt load were used on DC-8,9 and 10's.
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  9. #129
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    I believe they were -might have been military but aircraft had them on every moving part------



    Tie rod ends were developed for tie rods--------steering--------

    Not suspension components carry weight, transferring vehicle acceleration/ deceleration------
    Last edited by jerry clayton; 11-19-2017 at 09:04 PM.

  10. #130
    40FordDeluxe's Avatar
    40FordDeluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2011
    Location
    Prairie City
    Car Year, Make, Model: 40 Ford Deluxe, 68 Corvette, 72&76 K30
    Posts
    7,264
    Blog Entries
    1

    Quote Originally Posted by jerry clayton View Post
    Tie rods were designed for steering loads not vehicle acceration and stopping loads ----anybody that thinks you have as much force thru your steering wheel as compared to any v8 engine torque/hp ------------

    And-----in this install the weak/failute prone arae is where the end of the tie rod threads in the tube are-------
    Oh really? There's no high force load on a drag link or tie rod and tube at a knuckle? I beg to differ. I like how you're calling the tie rod stud insufficient but then blame his mount that will fail first. I don't really like the mounts either. Imo if the tapered portion was thicker it would make me feel better instead of the 2 piece mount he has. This is not the way I'd do it either, but I don't see it being a death ride because of it. Like Seth said, I've seen tie rods used in all kinds of weird places on ag equipment, even some old gse. For instance, a tie rod attached to a pulley transferring to a rod to operate another component. No torque or force there? Not to mention those ball stud ends are forged then heat treated in most cases.

    I can appreciate the caution noted but maybe instead of saying I hope you're not on the same road as my family, offer a solution to why that's a bad idea. Hey, maybe this _____ is a better way. Rant over
    Last edited by 40FordDeluxe; 11-19-2017 at 10:25 PM.
    Driver50x likes this.
    Ryan
    1940 Ford Deluxe Tudor 354 Hemi 46RH Electric Blue w/multi-color flames, Ford 9" Residing in multiple pieces
    1968 Corvette Coupe 5.9 Cummins Drag Car 11.43@130mph No stall leaving the line with 1250 rpm's and poor 2.2 60'
    1972 Chevy K30 Longhorn P-pumped 24v Compound Turbos 47RH Just another money pit
    1971 Camaro RS 5.3 BTR Stage 3 cam, SuperT10
    Tire Sizes

  11. #131
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    So you are more concerned with the threaded sleeve splitting apart, compared to the potential failure of the 'rod end'. Interesting. I would then point out that the stress load on the threads decreases in direct proportion to the length of shaft inserted. IE: the deeper it's screwed in, the safer it becomes.

    Remember also: work is calculated on the cosine, which for this application will always be one, so long as the rear end is centered.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  12. #132
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    Ryan you have misread what I probably haven't written too well---If this site would ever get where I could post pictures as I want, I could better illustrate the points that I think are failure bound------Its not the stud, tapered or not-its the threaded part of the tube at the very end of the tie rod end-in this case-6 to 8 inches from the end-

    And I've worked on lots of ag and industrial equipment over the years and seen lots of thse shaker things-------the torque and force used there is no where near what you'll see on a v8 driven vehicle transmitting 400 hp or hundreds of lbs of thrust (engine multiplied by gear ratio) into the rods that connect the rear end to the frame-add in chough holes, bumps, slamming speed shift gear changes, full throttle downshifts---------

  13. #133
    Driver50x's Avatar
    Driver50x is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2016
    Location
    Saint Petersburg, Florida
    Posts
    430

    I emailed TRW about it, they told me that the design sheet/engineering data is not available.

    I am using these tie rods and swedge tubes with 100% thread engagement. The threads on the tie rod is about 3 inches long, and the threads inside the tube is 1 3/4 inches long.

    Seth, the tie rod shank has 5/8" fine threads. The castle nut on the stud has 1/2" threads.

    Ryan, Thanks for sticking up for me! I'm not sure if I explained well enough how I made the mounts. I cut the mounts out of 1/4" angle iron. I then drilled a hole in them, and then welded a nut to the backside. I then cut the taper into both the angle iron and the nut. The thickness of the tapered part is about the same thickness as on a stock steering spindle arm. These pictures aren't really the best, but I'm not at home right now to take new ones.

    Jerry, are you saying that the extra length of the tie rod vs. the length of a heim joint is going to cause the swedge tube to fail?
    I'm trying to understand what difference that would make. Also, I know that posting pictures on this site is a bit convoluted. I could try talking you through it if you like.






    8811CA45-DDEC-4411-8551-CC8ABC7F068F.JPG171CF904-276C-422D-ACA1-D71BFBC4DD73.JPG1F103CDB-03F3-4965-9388-385A4BC23190.JPG
    53 Chevy5 likes this.
    Steve

  14. #134
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,709

    I'll ride with you, I'm not going to stir the pot if I can help it but I still don't understand how the threads of a heim joint are any different than the threads of a ball joint. I have $0.04 in this conversation now. LOL
    Driver50x likes this.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  15. #135
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    I just checked back in after the latest server crash and decided to look in on this build. I'm no engineer, but I think I have a pretty good "seat of the pants" feel for putting a rod together. Lord knows I've looked at enough of them through the years.

    First thing I see in the rear is that there is no control to prevent chassis lateral movement. I would hard-mount one end of the spring like some of the fellows do on front springs to prevent the same thing. You could also do it with a Panhard bar, but as I've said before, someone should have pinched Rene Panhard's head off as soon as he popped out of the chute. A Panhard bar is, without question, the most horrible automotive design ever conceived.

    Second thing I see is that there will be a fight going on between the spring mount and the control arms. Something is going to break unless you allow the spring mount to free-float. Rather than doing that, I would ditch the 4-bar arrangement and go with a modified ladder bar design, something like this......
    http://st.hotrod.com/uploads/sites/2...nd%7C596%3A372
    This more closely emulates the design that Henry started with while using a single spring, although his design pivoted in the middle on a ball/cup arrangement front and rear.

    You will be able to see this malfunction by making up some heavy construction paper components swiveling on stick pins (paper dolls, as suggested by Carroll Smith (suspension engineer extraordinaire) and running the rear suspension through its cycles to eyeball differential angles. Right now, before you do anything else, purchase a flat bathroom door from someone in town and build a wooden or metal support for it, making yourself an impromptu cheapo drafting table so you can see some of these things work before you commit them to steel. If you would like to add to your library and learn from the very best, purchase Tune To Win, by Carroll Smith. He ran the team for Ford Motor Co. that went to LeMans and whipped Ferrari with the Ford GT40. Paper dolls are found toward the end of the book.

    Although a highly irregular idea, using tie rod ends as a suspension component does not scare me at all. I can see Jerry's point, but in my mind all the force will be directly inline, with no bending at all and so it looks like it will work to me, although I dislike the harsh drive that results from metal to metal connections. I would be in favor of using a Johnny Joint or equivalent as a rod end.
    https://www.youtube.com/watch?v=8dE_tFFvjfU

    The paper dolls will be very helpful when you return to the front end to re-design those components. As noted by Jim Robinson, you will not like the results of what you have designed so far.

    If I were to be involved in the front end, I might try fabbing up a rack and pinion system from a junkyard R&P. Here is a writeup of a commercially-available unit and how it works on a straight axle.
    https://www.ford-trucks.com/forums/9...le-report.html
    I would also design new steering arms that would provide 100% Ackermann. Come to think of it, I would probably design a whole new front end around a shorter tubular axle using disc brakes. Keeping within a budget is fine, but in my opinion, one must make allowances where driveability, performance and safety are involved.

    If, in the end, the car does not ride and drive very, very nicely, then the entire exercise was a waste of time, money and energy.

    .
    Last edited by techinspector1; 11-25-2017 at 12:23 PM.
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

Reply To Thread
Page 9 of 28 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink