Hybrid View
-
02-17-2017 04:34 PM #1
Finished up the hot air deflector today
[IMG]
20170217_165108_resized by Ben Modified, on Flickr[/IMG]
[IMG]
20170217_165129_resized by Ben Modified, on Flickr[/IMG]
Bent up some aluminized exhaust tubing to route one radiator to the other
[IMG]
20170217_165225_resized by Ben Modified, on Flickr[/IMG]
Started wrapping it in heat wrap as the tubing runs along the back wall of the cab
[IMG]
20170217_170822_resized by Ben Modified, on Flickr[/IMG]
http://www.BenModified.com
-
02-23-2017 02:59 AM #2
Second radiator is in.
[IMG]
20170221_163131_resized by Ben Modified, on Flickr[/IMG]
Also drilled holes in the side scoop and sheet metal to allow the heat to escape. There is a block off plate inside the scoop between the air intake (front) and the radiator exhaust area so that cool air goes thru the trans cooler and is then sucked back out as it is pushed thru the radiator
[IMG]
20170222_141120_resized by Ben Modified, on Flickr[/IMG]
http://www.BenModified.com





301Likes
LinkBack URL
About LinkBacks
Reply With Quote
This site is up more often lately, but very little traffic.
Dead!