Thread: Volkswagen Single Cab Street Rod with 400 Hp Chevy crate motor

Tweet

Started smoothing off the hundreds of tack welds on the headlight filler panels.





http://www.BenModified.com

Progress. Welded up the cut in the door and removed the alignment clamps






Also made some progress on the drivers side bed side and engine vents. Welded in the mounting strips and grafted in the vents but still have lots of tack welds and grinding to go.








http://www.BenModified.com

Todays progress. The panel has many small imperfections but it should be easier to hammer them out now that it is held in place.



http://www.BenModified.com

Part 12 of the Build on YouTube
https://www.youtube.com/watch?v=a_a4wMibd6c