Thread: 302 cyl head print (needed!)

Tweet

thanks Louey, I had some of the prints around here but no way to upload them so just mentioned that Schoenfeld had them. I usually get the gaskets and mild steel flanges from them , modify the flanges to fit our heads and send the prints and gaskets/flanges to Stainless Headers in MN to have the flanges made from Stainless Steel .

I agree with the guys. Unless you have the equipment to cut those flanges yourself buy ones from one of the vendors who have them on the shelf. 289-302-351 header flanges are a dime a dozen, no magic whatsoever, so why reinvent the wheel?

Don

THANK YOU Louey!. you have no idea how long i have been trying to find these.BUT....

i still need a location for the mounting stud holes (to hold the flange to the head). These are not givin. and they look off centerd from the port holes. How do i find this?
I have the right tools to cut these out. I can make them cheaper that 75 bucks or whatever
Depending on the price of steel i can basicly make the flange for around 5 cents a pound.

This flange will then be tig welded to a set of custom flared pipes. I'l try to keep you guys updated.