Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Planning on Full Fendered Deuce later
          
   
   

Results 1 to 15 of 31

Threaded View

  1. #20
    Rufus is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2008
    Location
    Linden
    Car Year, Make, Model: Hemi powered 32 Ford 3 window
    Posts
    23

    My 3 window is being built as if it would have been built back in 1964, with a lot of help and great advice from Deuce along the way. From the outside only parts that were available back then will be visible. Although 4 link was available 44 years ago most people were still using hairpins, as am I.

    Mine are mounted about an inch up the frame rails which gives plenty of ground clearance as can be seen in these pics.







    That's the only way to mount them as far as I'm concerned. There's no chance of a weld coming apart or metal fatigue causing a lower bracket to fail.
    Last edited by Rufus; 12-20-2009 at 09:09 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink