Quote Originally Posted by Dave Severson View Post
Most of the front four link kits that are made Deuce specific will work on either a fendered or non-fendered car.... If in doubt, call the company that makes the 4 link kit before you buy one.....


See where the upper 4 bar is located on the frame rail ?

Then again here on my 32 chassis



Then again, my chassis with the fenders installed



The 4 bar set up from TCI ( and MOST of the others ) will clear front fenders ... installed in their original position.

In my opinion
the 4 bar setup is vastly better than a hairpin setup.

1 ) more ground clearance
2 ) the axle has less king pin caster change during axle movement UP/DOWN
3 ) better ride
4 ) easier to adjust caster

If you do not understand toe - in, caster and camber
Do yourself a favor and go here

http://www.ozebiz.com.au/racetech/theory/align.html