Thread: Coolant in cylinders; fresh 400 sbc build

Tweet

OK--couldn't get it to post but do have a pic in my gallery of the steam holes in a 400 block---however these have been blocked as is sorta common mod for some guys---you can see how the one hole is cracked over to the head bolt hole and toward the cylinder however this block has been sleeved because of the crack into the wall---hope it gives you an idea of what to expect or look for. It is the first pic that comes up.

If anyone would like to post it to the thread I would appreciate it---Maybe Looey can take care of it.

Thanks

Jerry

Originally Posted by jerry clayton

OK--couldn't get it to post but do have a pic in my gallery of the steam holes in a 400 block---however these have been blocked as is sorta common mod for some guys---you can see how the one hole is cracked over to the head bolt hole and toward the cylinder however this block has been sleeved because of the crack into the wall---hope it gives you an idea of what to expect or look for. It is the first pic that comes up.

If anyone would like to post it to the thread I would appreciate it---Maybe Looey can take care of it.

Thanks

Jerry

Post the pic in PhotoBucket and copy the URL. Then reply and click the "Insert Image" button at top of window and paste the URL