Results 1 to 15 of 35
LinkBack URL
About LinkBacksThreaded View
-
08-16-2010 05:49 AM #14
CHR Member
- Join Date
- Jan 2003
- Location
- Centreville
- Car Year, Make, Model: 35 ford 5 window coupe
- Posts
- 691
Well I am torn here because my proportioning valve came with sealed flared to NPT adapters and it works fine so I don't know if I should just use sealer on my residual pressure valves or get flared ones like I probably should have. Is just sealing NPT threads with liquid sealer perfectly acceptable or should I pay $50 bucks for more RPVs?
. Hombre- thanks a lot for taking those pictures that helps.
31- so the wilwood rpv's when used with AN fittings just use sealer? If it works like that for AN I will probably just seal what I have.
sunset- it sounds like there is enough hatred for the tape that I will stear clear of it. thanks
Dave- sorry, I meant 3/16" lines...I just had 3/8" nuts on the brain from wrenching all day. Jerry you were correct.
thanks everyone!Last edited by 35fordcoupe; 08-16-2010 at 05:55 AM.
'35 Ford coupe- LT1/T56, '32 Ford pickup, 70 GTO convertible, 06 GTO
Robert
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!