Thread: 27 T tudor Hot Rod build
Results 1 to 15 of 161
LinkBack URL
About LinkBacksHybrid View
-
06-16-2009 08:02 AM #1
CHR Member
- Join Date
- Nov 2007
- Location
- Where the Redwoods Meet The Sea
- Car Year, Make, Model: 26 T Tudor, '57 VW ragtop
- Posts
- 150
Glad the dimensions from my Tudor were able to help out, Thomas...I'll be watching your build thread with interest and excitement...
-
06-20-2009 01:29 PM #2
CHR Member
- Join Date
- Mar 2005
- Location
- Lynchburg
- Car Year, Make, Model: 68 Chevelle SS & 72, 27 Tudor, 26 Coupe
- Posts
- 136
Thanks again for the dimensions Dave. I'll be joining the body back together today if all goes as planned.
Originally Posted by 26Tudor
-
06-22-2009 09:53 PM #3
CHR Member
- Join Date
- Mar 2005
- Location
- Lynchburg
- Car Year, Make, Model: 68 Chevelle SS & 72, 27 Tudor, 26 Coupe
- Posts
- 136
Well I worked a lot over saturday, sunday, and a little bit today to get my body back together. The body lines lined up great and the door gaps are set up pretty well.
There is one problem and that is the back panel drivers side sits half an inch higher than the passengers side from the ground. You can tell in the last pic that it is off. The drivers quarter panel does sit a quarter of an inch lower than the back panel. So I guess I need to un-bolt the T strip and get the quarter to sit higher.
Overall I am happy considering the body has been apart ,at the very least, for 20 years.
Thanks for the help with the dimensions Dave.
Last edited by 68Chevelle; 06-22-2009 at 09:57 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I'm happy to see it back up, sure hope it lasts.
Back online