37 Ford build--IE: old Header issues thread /37 Ford/5.0/GT40P heads

[34_40]

Hey Mike,
Thanks for the pics. I'll probably blend all you guys methods together to lift this body up. Some great ideas.
Hope you're feeling better!
Randy

Randy, that's how I came up with that "rig". Alot of ideas melded together.

Thanks for asking, re; my health. I get asked so often on that topic now, when people say "how do you feel?" I now respond, "With my HANDS!"

We're looking forward to your decision and how you raise that body off!

Mike

[randyr]

Thanks for asking, re; my health. I get asked so often on that topic now, when people say "how do you feel?" I now respond, "With my HANDS!"

We're looking forward to your decision and how you raise that body off!

Mike

Well, I hope your "hands" are getting a lot of action then!!!!

Along with how I get the body off will be the decision for what trans I end up with......still muddling thru the options on that one but gotta say I haven't ruled out the T5 yet.....

[34_40]

Well, I hope your "hands" are getting a lot of action then!!!!

Along with how I get the body off will be the decision for what trans I end up with......still muddling thru the options on that one but gotta say I haven't ruled out the T5 yet.....

While I think it would be kewl to "row the manual trans through the gears", it's gonna be a lot of work. With enough cutting and welding you can make anything fit. Just where do you want to draw the line??? Personally, I'd go for the auto over drive and be happy. Maybe after a few years you'll get the bug again and "re-do" the car again. That's what always happens to me! They just never seem to be finished in my mind! I want to always "make it better"!!!

Glad to see you back here and posting. Missed your posts over the last few weeks/months.

Mike

[bluestang67]

Randy a pedal assembly from a 94 to 98 Mustang will take care of your woes on the cable clutch . Very small mounting assembly that takes up hardly any room at all . Here is a pic of said assembly inside the Model A great fit for this small area also .

[randyr]

Randy a pedal assembly from a 94 to 98 Mustang will take care of your woes on the cable clutch . Very small mounting assembly that takes up hardly any room at all . Here is a pic of said assembly inside the Model A great fit for this small area also .

Hey Bobby, thanks for the pic. Those Mustang pedals might be ok but I'm not willing to poke a hole in my new firewall for a master cylinder. Whatever I do will have to be under the floor or under the dash. What drive train are you going to put in your car?
Good to hear from you.
Randy

[bluestang67]

SBF with a T-5 the shape of the firewall has me thinking on the master cylinder also . I will cut and shape it though to get it to work . They do have the right angle master pedal sets hydraulic clutch which will work too .

With the floor pedals some type of bell crank could be made easy enough if you want to keep the pedals there and use a cable . I am just trying what I hope may be easy application with hanging pedals..

[randyr]

SBF with a T-5 the shape of the firewall has me thinking on the master cylinder also . I will cut and shape it though to get it to work . They do have the right angle master pedal sets hydraulic clutch which will work too .

With the floor pedals some type of bell crank could be made easy enough if you want to keep the pedals there and use a cable . I am just trying what I hope may be easy application with hanging pedals..

Yeah, another Ford in a Ford!! If you're cutting the orignial firewall, you can hang a master cylinder on it. My old setup was that way with the C4 before I started this rebuild. We trimmed the old firewall enough to fit the 302 in there and left the rest in tact. I was running a Pinto MC without a power booster hooked to a brake pedal that was fashioned from some unknown Ford from the 70's or 80's. But with the rebuild, I've put in a new big block firewall for more clearance and a cleaner look. I'm trying to keep from putting things on it or through it. That big firewall also has a wider hump in the middle which limits gas pedal & brake pedal space when using the under the floor methods. I had to bend the brake pedal toward the outside of the car to make space for gas pedal. Thus, trying to configure a clutch pedal under there with it seems impossible if I also want the exhaust pipe on that side too. I'm studying the 90 degee under dash units now to see if there's something that will work with the space I have. If it doesn't, I can always revert back to my AOD plans. My x-member is already modified for the C4. That modification should also accomodate the T-5 by redrilling the holes for the mount. The AOD would require more trimming of the x-member.

I've been studying the T-5 threads on HAMB and various Mustang sites and they say you can move the T-5 shifter forward several inches on the Mustang T-5 by using the tailhousing from 83-93 chevy S-10. They also say 90-95 Mustang V8 T-5's have a higher torque rating. The 94-95 has a bit longer input shaft which requires you to use the 94-95 bellhousing with it but the overall length is supposed to be the same.

The 90 degree underdash units all have hydraulic clutches. I've found several links to change the T-5 to hydraulic clutch by simply adding a slave cylinder to the clutch fork. If you want links to any of this stuff let me know....I haven't bought anything yet but I'm doing lots of reading....LOL!