We have sucesssssssssssss...........had to drill the bolt out,thank goodness they used what I call butter bolts.....no hardness rating,soft as butter.......drilled it out,tapped and hammered around with the screw driver and got the rest out,tapped a bolt down into it to clean the threads.

Now just have to get if fired back up and see what happens......they had the main fuse filled with aluminum foil and wire because it kept blowing,at least it had a fuse, discovered it was the loose ignition switch turning and shorting a wire out....turns out the ignition switch tumblers are bad and it makes it hard to turn,which resulted in it working loose and rotating causing a short........

Off to get fuses and a new ignition switch..........I did discover under the dash some one had installed a nice new fuse block with spade fuses...that will make cleaning the wire mess up a lot nicer as I would have done that any way.....things are looking up