yea, the photo inside shop is Duane's at N&N. Wanted photo of it as we picked it up and then second photo is as we parked in my driveway at home after the 17 hour drive home with it. lineup of cars I have done and are presently working on are on my web page at daytonagary.com

I don't like the fenderless 32 without a roll pan and Duane doesn't make one so I bought a roll pan from BeBops and it fit very well. Curvature of back fits N&N car perfectly, was about a half inch narrower (only a 1/4" each side) than N&N body and sides ran forward a little long into the wheel opening but didn't take much to make it fit perfectly. I had to do a little cutting on the roll pan to shorten the front on each side and used Duraglass to fill in the 1/4" on each side but it now blends perfect even inside the wheel well area and looks like it came out of Duane's mold that way. Duane said he will make a roll pan like I bought to fit his cars when he gets time to make a mold for it. I had taken this roll pan with me when I picked my car up so Duane could see how it fit his cars at his shop. Hope he makes them soon as one will go on every 32 I build. Going to put 1 inch by 8 inch tail lights down in the roll pan on this one.