finished up some things on the pinched front end today. moved the rear mounting holes in the chassis up 2" on the back of the hairpins since I changed the original 4" drop to a 6" drop axle. had to shorten the brake line running behind the front crossmember since I took over 4 inches out of the crossmember to give the frame a full pinch but all other brake lines N&N had on chassis worked fine as is. swapped out lower shock mounts on the axle from left to right and that took care of moving the shocks more inboard to match the narrower frame. have to weld back on the upper shock mounts yet and also the panhard bar mount has to be rewelded on in proper position for the new pinch.