Lowered the front end with the 6" drop axle plus will take one or two leaves out of front spring too to get front end lower yet so needed to get the back end down a couple inches too. Cut out trunk floor today to get more travel room between center of rear end and trunk floor. Will fiberglass the hole back in with a 2 inch rise in that area. With gas tank in trunk and more space lost with the riser, we won't be carrying much luggage. Wife has been busy this week getting templates made for door panels, kick panels, etc so she can start doing her upholstery work. let her pick out fabric and colors and design the interior. photo is her mockup for the center console which will house the floor shifter, air conditioning controls and radio. We will just fiberglass right over this mockup to make the console since this is just a one off piece and won't make a mold. Also set it on its front wheels first time today since taking it apart to pinch the nose of the frame.