photo of wife busy at work on her interior panels. Have gas tank mostly plumbed to electric fuel pump. have to finish running the return line to regulator and mount the 1/4" vent line as it goes down through floor. this universal tank didn't have a place for return line so I had to drill hole in block off plate they use if you wanted to put the fill in the side of the tank. Welded a fuel line into that plate and bolted it to side of tank today. the fill tube with screw on top came 3" up and was going to be hard to put gas in car with it under trunk lid area so I cut it at an angle and it faces forward just right now.