Quote Originally Posted by mysticowner View Post
I would like to put on an aluminum intake. I have peanut port heads as far as I know. What intake would be benificial to the rpm range of 0-5000?

Could I put on the oval shape intake ports without losing to much from the mismatch?
your not really going to see much power out of this intake swap .the stock 330hp intake is far from the best it takes abit of hp to turn it to MPH on the water . as for the miss match on the intake to port theres a intake casted for the smaller port runners .if fresh water the intake wil be fine .they did cast a bronze in the alum 375 hp and up intake s. but i seen salt eat them up as well just from the salt sitting on the head to intake and rot the alum up very bad it just a expendable deal . i seen alum heads get eatten up by salt is well as iron ... in salt water every thing gets screwed up.