Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 9" rear end failure
          
   
   

Reply To Thread
Results 1 to 15 of 30

Hybrid View

  1. #1
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    is there a sping pack in the carrier ? four pins are way better and you still can get some rebuild parts for they have a steel cage and use 4 springs . yours could have the same cage just not cut out for the other pin and still take for 4 springs . the very old ones took a spring in a spring only seen one time could not get parts for it so i am fuzz on that one but even if clutchs were gone you would still get the one wheel deal your axel is to short . who put the wheel bearing s on ? did they put the wedding ring on first ? then the bearing. drums would hand out a bit from the backers but not much they over lap any ways ??????? that would do it to
    Last edited by pat mccarthy; 12-25-2010 at 06:05 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink