Thread: 9" rear end failure

Tweet

use some bluing or a marker or one line of masking tape 1.250 inch from the end of axles spine you need to drive the carrier more is better should see the wear marks on the spines but thats off the top of my head . this will also tell you if your all the way in on clutch side . i allways built the posi with a stub i made up from old axels that i chop down and welded a 1by1 pc of tube to look like a T and clamp the 1by 1 in the vices so when i built the posi up.i always the pack and side gear were line up