Thread: 9" rear end failure
Results 1 to 15 of 30
LinkBack URL
About LinkBacksHybrid View
-
12-25-2010 04:00 PM #1
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
put the axles back in the housing measure the gap they it should be around 1 1/4 if more then the axles are to short . if you do not want to do that shove them in to the pig and measure were the bearing seats in the housing and measure over all housing should be close . if you freind re built the limted slip and did not line up the limted slip drive hub to the side gear the axle on clutch side will not engage and you may have had the axles right to left mix up as there is one long and one short .sounds like to me you were driveing just a the clutch pack pressure that why the look so bad and not thru the side grears working the spiders so axles were to short or the axles were mixed left to rightLast edited by pat mccarthy; 12-25-2010 at 05:46 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I saw last night on fb about John. The world sure lost a great one. I'm going to miss his humor, advice, and perspective from another portion of the world. Rest in Peace Johnboy.
John Norton aka johnboy