I use the cutters from Speedway $19.99 cheap as chips and work perfectly.







Quote Originally Posted by stovens View Post
Dago
There was a great thread on here on how to cut braided stainless line. If you don't want to spend a fortune on cutters, one member posted using a chisle, hammer, and aluminum block under it. I was extremely skeptical, until I watched the video and did it myself.
http://www.anplumbing.com/installation.html
Also the thread itself had tons of info
here is the link
http://www.clubhotrod.com/forums/sho...ting+stainless