Thread: Bodywork Questions
Results 1 to 14 of 14
LinkBack URL
About LinkBacksThreaded View
-
04-05-2004 06:45 AM #9
CHR Member
- Join Date
- Sep 2003
- Location
- eastern part
- Car Year, Make, Model: 1934 Schwinn
- Posts
- 747
on the trim holes ( or any that are small ) ....
I put a piece of copper ( flattened pipe will work ) behind the hole then weld it up >> " less wire "
don't know if you know that but ,if the hole is small you can just stitch it right up... then remove the backing ...
sounds like it was "stainless" , you'll need stainless wire to weld stainless ..Originally posted by JCT400SB
did have a little trouble were the body piece that wraps around the headlight ,Tried to weld it but I ended up with a shiny puddel of silver on the drive way. Have any of you run across this and how does it have to be welded?
or if it's just "to thin" or chromed tin , turn your settings down really low or brazen it w/your torch ... not sure what you mean by? got pixs ?the body piece that wraps around the headlight
and Guys.... if I'm wrong , please correct me ...
Last edited by treekiller; 06-25-2004 at 10:41 AM.
"Whad'ya want for nuth'N, ..............aaa,rrrrrubber biscuit... ?"
"bad spellers of the word untie ! "
If your wondering how I'm doing I'm > " I'm still pick'N up the shinny stuff and passing open windows
"
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Dammit, another good ol boy gone. Condolence to the family. RIP Mike
RIP Mike Frade, aka 34_40