Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Lets talk paint product options 32 ford
          
   
   

Reply To Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 18
  1. #1
    sprayed99's Avatar
    sprayed99 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2013
    Location
    Wylie
    Posts
    153

    Lets talk paint product options 32 ford

     



    *Please only seasoned vets reply*

    Okay my 32 ford is in 6-8 year old DP90 (not LF) and it will be time soon to get it all lined out and in color. The body work is 95% ish

    I currently have the following plan of attack.

    Scuff up current DP90
    Reshoot a fresh coat of DP90LF
    Shoot a few coats of Slick Sand and block with 80
    Shoot a few more coats of slick sand and block with 180
    Shoot a few coats of 2k and block out <<<< Not sure on which 2K need advice
    Seal with reduced DP90LF
    Shoot PPG DBC Base
    Shoot PPG 2002 Clear
    ETC....

    The problem comes in with the 2K. I'm not a fan of K36s performance (mainly shrink back) and price

    Sooooooo what would you pros suggest?

    This will be done in a newer down draft at a friends shop. I will be doing 99% of the work with guidance from him and I will be pulling the trigger on all stages.


    This will be my 3rd full job, but have painted piles of other parts.

    Thanks All

  2. #2
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    i do not care much for dp as a sealer for a show quilty job .fine for production. use many gallons of the stuff . the DBC and the 2002 clear is ok . as for the 2K s primer i used a heavy filler like the k 200 sanded up to 180 wet to 220 grit . last 3 coats then move up to K 36 to finale and colored it if was a poor cover color. wet sand the 36 up to from 320 up to 600 gray back3M wet paper . painted on the 36s no sealer .did many show finishs this way but that been over 10years not sure if ppg still has K36? i move to martin senior primers for a sealer primer .i can go in this in to detail on evey step i have older paint jobs out there that have had very good hold out one is over 20 years old and is a black car . if you want you can PM me and i help much as i can .i had to hang my paint gun up 15 years ago for heath reasons so i not up to speed on some up the new product lines
    Last edited by pat mccarthy; 07-27-2013 at 06:57 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  3. #3
    sprayed99's Avatar
    sprayed99 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2013
    Location
    Wylie
    Posts
    153

    Yeah they still have K36. I wont be using it as I have had a few issues with it. Why do you say not to use the DP as a sealer?

  4. #4
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    They don't make 2002 clear anymore, if you find some it's someone's old stock. New numbers are 3000 and 4000, and it's more expensive then 2002 was! Might as well switch over to House of Kolor, better product and now it's price comparable with PPG! TCP Global and Stevenson's Paint and Supply are a couple of good sources. Depending on what color you're shooting, the right shade of sealer is important to make the color come out right...
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  5. #5
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    DP for use as a sealer if any trash gets in it it,s a bitch to sand . if you want a flat finish i never like it for any kind of hold out of solvent it has zip solvents will move threw it as well . as issues with 36 never had hold out issues with it as a sealer primer . i never try to bury some thing were body filler should of been used. i never covered the 36s with icing filler then re coat it with 36 s when the filling should of been at the base of you prep work less if your looking for solvent driving down and then shrinking back up .like i did say i went to MS primer for a sealer /primer . there were many mixed systems i used in the shops i worked it they were marson primers or rubber seal ,,,,or??? clears like sun glow .matrix they all ways said like PPG XYandZ were many times the ppg did have better hold out .when i painted planes all the glass parts and with air cooled 540 cid engine hold out was good for the heat the very thin glass cowling parts had to deal with
    Last edited by pat mccarthy; 07-28-2013 at 01:35 AM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  6. #6
    shine's Avatar
    shine is online now CHR Member Visit my Photo Gallery
    Join Date
    Nov 2003
    Location
    bluff dale texas
    Car Year, Make, Model: 47 inderweed
    Posts
    2,126

    spi epoxy for your base . forget the k36 . it was 70's technology . i use no urethane or polyester primers . i do my build with epoxy then when ready for color i start with a reduced coat of epoxy. ppg for colors and spi universal clear.

  7. #7
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    really 70s we used DZ primer and featherfill 70early 80s . fill K 200 was not out till mild 80s k36 was after that less you saying all urethane or polyesters primers are dated. i think most polyurethane and have a hirer heat hold out in air cure then epoxy??
    Last edited by pat mccarthy; 07-28-2013 at 07:49 AM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  8. #8
    shine's Avatar
    shine is online now CHR Member Visit my Photo Gallery
    Join Date
    Nov 2003
    Location
    bluff dale texas
    Car Year, Make, Model: 47 inderweed
    Posts
    2,126

    urethane and polyester both react to uv rays. swell and shrink . in the ladder of resins epoxy is at the top . once cured it will not react to uv. there is nothing better for corrosion protection and adhesion than epoxy. but all epoxies are not the same. dplf is useless .
    i have done epoxy only since 05 . urethane primer is ok for collision work but as a high build it creates too many problems .

  9. #9
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    the hold out with some of the k200s was good for me sure there is better. most of the time there is. as epoxides can be cross linked to poly urethanes Aliphatic s epoxy what i used to paint my machines in the shop and cross link to many other make ups . i have had many job s i done with the k200s but i seen it in the wrong hands in production shops try to hind a 40 grit mark i will shink up . most all the time i never tried to fill up poor work when another coat of fill would do the job. many times i would let the sun bake the primer with it cut open . i have to watch out for some epoxy the dust i have a lung/ skin sensitive from it
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  10. #10
    sprayed99's Avatar
    sprayed99 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2013
    Location
    Wylie
    Posts
    153

    Quote Originally Posted by Dave Severson View Post
    They don't make 2002 clear anymore, if you find some it's someone's old stock. New numbers are 3000 and 4000, and it's more expensive then 2002 was! Might as well switch over to House of Kolor, better product and now it's price comparable with PPG! TCP Global and Stevenson's Paint and Supply are a couple of good sources. Depending on what color you're shooting, the right shade of sealer is important to make the color come out right...
    You are right about being old stock... Its my stock that has been temp controlled since last year and I just shot a column today with it without issue and the bike I painted came out killer as well. So no I wont be changing clears especially on a project like this. I need to stay with things that I'm confident in.

    Sealer color is rather a moot point as the paint color is black

  11. #11
    sprayed99's Avatar
    sprayed99 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2013
    Location
    Wylie
    Posts
    153

    Quote Originally Posted by shine View Post
    urethane and polyester both react to uv rays. swell and shrink . in the ladder of resins epoxy is at the top . once cured it will not react to uv. there is nothing better for corrosion protection and adhesion than epoxy. but all epoxies are not the same. dplf is useless .
    i have done epoxy only since 05 . urethane primer is ok for collision work but as a high build it creates too many problems .
    Since you say DPLF is crap you want to give a suggestion of what to use?

  12. #12
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    the 2002 clear will last for a very long time it.s the head space in the can of hardener air/moister kills the hardener no fun when you find this out the hard way .paint i all ways moved it to a smaller can to keep air out
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  13. #13
    shine's Avatar
    shine is online now CHR Member Visit my Photo Gallery
    Join Date
    Nov 2003
    Location
    bluff dale texas
    Car Year, Make, Model: 47 inderweed
    Posts
    2,126

    when they changed the makeup of dp is when i quit using it. i use SPI products now. the epoxy is outstanding. sands well and is a good build. 72 hr pot life covered. you can save what is left and add it to a new mix the next day , clock starts over. between the dplf and the clears available i was ready to retire. i found spi and have not looked back. the clears buff great and have no die back . i did the 57 vette and waited from dec to march to buff . buffs same as next day almost.
    i just got tired of trying to do custom work with products designed for collision work . too much effort and limitations .
    this is a site for spi users. it is not part of spi but barry post there .

    Search Results - SPI User Forums

    a shot of mig gas in the hardener will help save it. it is the moisture that kills it .

  14. #14
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Quote Originally Posted by sprayed99 View Post
    You are right about being old stock... Its my stock that has been temp controlled since last year and I just shot a column today with it without issue and the bike I painted came out killer as well. So no I wont be changing clears especially on a project like this. I need to stay with things that I'm confident in.

    Sealer color is rather a moot point as the paint color is black
    Might have mentioned that in you 1st post, I wouldn't have wasted your time!!!!
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  15. #15
    sprayed99's Avatar
    sprayed99 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2013
    Location
    Wylie
    Posts
    153

    Quote Originally Posted by Dave Severson View Post
    Might have mentioned that in you 1st post, I wouldn't have wasted your time!!!!
    Sorry didn't think of it at the time... no reason for butt hurtness.

Reply To Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink