Thread: Lets talk paint product options 32 ford

Tweet

Yeah they still have K36. I wont be using it as I have had a few issues with it. Why do you say not to use the DP as a sealer?

DP for use as a sealer if any trash gets in it it,s a bitch to sand . if you want a flat finish i never like it for any kind of hold out of solvent it has zip solvents will move threw it as well . as issues with 36 never had hold out issues with it as a sealer primer . i never try to bury some thing were body filler should of been used. i never covered the 36s with icing filler then re coat it with 36 s when the filling should of been at the base of you prep work less if your looking for solvent driving down and then shrinking back up .like i did say i went to MS primer for a sealer /primer . there were many mixed systems i used in the shops i worked it they were marson primers or rubber seal ,,,,or??? clears like sun glow .matrix they all ways said like PPG XYandZ were many times the ppg did have better hold out .when i painted planes all the glass parts and with air cooled 540 cid engine hold out was good for the heat the very thin glass cowling parts had to deal with