Thread: Which is better?

Tweet

Originally Posted by Dave Severson

That would be the new style with the trans in the back, right???? (Gotta remember, I ain't no chebby guy!!!!!)

Yeah, a trans-axle unit. From Wiki -

The Z06 utilizes the specially built M12 6-speed manual transmission. While outwardly similar to the base-model MM6 manual transmission, the M12 transmission is unique to the Z06, and not available on other Corvettes, i.e., coupés and convertibles. The M12 has more aggressive gearing to increase torque multiplication in most forward gears, allowing for more rapid acceleration and more usable torque at higher speeds. A transmission temperature sensor was added to protect the M12 from higher thermal stresses. The sensor warns the driver, via the Driver Information Center, with a "TRANS OVER TEMP" message if transmission temperatures approach their operating limits, and which could lead to damage if the transmission were not allowed to cool down. As with all C5 Corvettes, the transmission is located toward the rear of the vehicle, as a rear-mounted transaxle assembly. This allows a better overall weight distribution for the vehicle, as the weight of the transmission offsets some of the weight of the forward-sitting engine.

I've sent a message to one of the young guns that ran the shop to see if they did anything to help the rear end survive, and asking what RWHP they were seeing. He may not get back to me for a while as he follows his own internal drummer on things others ask about....