37 Ford build--IE: old Header issues thread /37 Ford/5.0/GT40P heads

[IC2]

And no one ever said it would it would be finished!

The only time a hobby car is finished is when it goes down the road with a new owner - then you get to start all over

[34_40]

The only time a hobby car is finished is when it goes down the road with a new owner - then you get to start all over

My favorite part!

[randyr]

Hey Fellas, I finally got to spend a few hours with my '37 this weekend! I hauled my rear end out to the garage and pulled my rear end out from under the car (those are two different rear ends...). I sanded it down and prepped it for painting so I can re-install if for good. Once I get that finished and get the car back on the ground, I'm going to raise the body high enough to get a good seal & coating on all the new floors, etc and replace all the rubber mounts with new ones. I'm also on the lookout for some more acceptable gears for the rear end. I don't think the current 2.75's will be all that impressive with a 5 speed trans . Will snap a few pics next time I'm out there so you guys will believe me.....

Hope you had a great 4th!!!
Later,
Randy