Dave by good I mean they made the 5.0 Mustangs run real well . They may not be full performance but I am building a mild engine . I seen that on the tubes and been figuring a fix for their correction to reshape . Would really rather spend that cash somewhere else if I can . But If It comes down to really needing the Sanderson headers I will get them . Then I will just copy Randy's exhaust .

Randy I will be watching the exhaust install to see where and what you have to do . I have been looking into the front wheel drive columns lately they are short and with the short shaft inside the firewall I have plenty of choices on where it will exit out . This should help with the exhaust exit a lot . This will give me a straight column with about 8 inches of play at the firewall to exit . Like you say everything will have to be mocked up to see what works and what mods will need to be done .