Quote Originally Posted by Henry Rifle View Post
Be careful. Coilover shocks have to have balanced (not equal, but balanced) up and down travel. Instructions usually remind you to check that - not just ride height.
Well I don't have any instructions and there is only one valve on each coilover (top). Care to elaborate a bit? While kneeling at the back of the car I pushed on the rear spreader bar and the car bounced almost 2 times. I know it isn't rally suppose to "Bounce" at all but rather just come back up to ride height. Now if I push down on it it does just that; comes back up to ride height. If I'm incorrect please chime in I appreciate all the input I can get. I'm off to bed. Gotta get up early and take the driver side wheel assembly off and tighten the steering arm. It has a very slight jiggle to it. I'll be sure to clean the threads and use loctite.