I'm a bit behind with posting updates but had a bit of free time today so here ya go.

I missed this job out ages ago so its catch up time, the window gap was massive so the gap was closed up by adding glass and then trimming to suit.








Next i added a return to screw window fuzzys to, I used 3/4" aluminium angle and slit the ends and curved to match the shape, then the slits were welded up. They are bonded to the underside with PU adhesieve











The nasty pressed steel alternator pulley was bugging me so made an aluminium one to match the other pulleys.










The nut was pretty nasty to and would rust before anything so a nice brass one was spun up, while i was there I addressed the water pump spigot, they always seem to go rusty so made a cover in brass, didnt have one big piece so made it in 2 bits out of scrap from the bin.











.