Thread: 32 ford truck project

Tweet

Originally Posted by 40FordDeluxe

Your console looks awesome! I want to build something like that for my 40.

If you need any help feel free to give me a shout.

Originally Posted by sprayed99

If you need any help feel free to give me a shout.

Thanks, I'll keep that in mind!

Phillip Cato is the upholsters name. In my book and many others he is among the top guys within a 6 hour drive from Dallas/Fort Worth.

If you look on Sculpt Garage - Dashes, Doors, Consoles, Trunks you can see some of his work.

I'm really glad he was able to get me in. On the 30th he will bring me the console and floor mats. The seat should be done near the end of the September.

Wiring is 100% complete and I need to flash a base start tune in the PCM and start it.

Dan, do you know a shop or anyone who has a set of scales to measure weight on all four corners of a car?

Originally Posted by Henry Rifle

Dan, do you know a shop or anyone who has a set of scales to measure weight on all four corners of a car?

I will have to ask. We had a set that ended up going to Dubai after we graciously lent them out...GRRRRRRR

Originally Posted by Henry Rifle

Dan, do you know a shop or anyone who has a set of scales to measure weight on all four corners of a car?

Jack, do you have any circle track racers or circle track parts places near you? Most of the late model on up guys usually have them. Maybe you can get some one to let you use them at their place?

Console is done and I have started the work on the door panels.

Nice work .

Very nice!

Door panels are done except for covering them.

The truck does run now... on 7 cylinders

I have had injectors problems from hell.

I pressured up the system and one of the brand new bosch red top injectors split open on the top and shot gas all over the damn place. Went over to my Dads and grabbed an extra used set of LS1 injectors and one of them has a dead coil.... UGH. I'm now waiting on a set of new 28lb/hr stock LS1 injectors to come in the mail. I knew I should have just bit the bullet and spent the 950.00 on a set of ID725s. You live and learn I guess.

Here is a snap shot of the finished door panel and dont pay attention to my backwards number line...LMAO

Those look great! Sorry to hear about your injector issues.

Thanks for the video, sounds just awesome!

It sure sounds great!

So I get to a computer that actually has sound and now the link is gone? Are you hiding it from us? Was that a teaser? It sure looked good with the pulleys turning and everything!