If you need any help feel free to give me a shout.
Printable View
Dan, do you know a shop or anyone who has a set of scales to measure weight on all four corners of a car?
Phillip Cato is the upholsters name. In my book and many others he is among the top guys within a 6 hour drive from Dallas/Fort Worth.
If you look on Sculpt Garage - Dashes, Doors, Consoles, Trunks you can see some of his work.
I'm really glad he was able to get me in. On the 30th he will bring me the console and floor mats. The seat should be done near the end of the September.
Wiring is 100% complete and I need to flash a base start tune in the PCM and start it.
Console is done and I have started the work on the door panels.
http://i93.photobucket.com/albums/l5...psc943df9f.jpghttp://i93.photobucket.com/albums/l5...ps5d78c856.jpg
Nice work .
Very nice!
Door panels are done except for covering them.
The truck does run now... on 7 cylinders :(
I have had injectors problems from hell.
I pressured up the system and one of the brand new bosch red top injectors split open on the top and shot gas all over the damn place. Went over to my Dads and grabbed an extra used set of LS1 injectors and one of them has a dead coil.... UGH. I'm now waiting on a set of new 28lb/hr stock LS1 injectors to come in the mail. I knew I should have just bit the bullet and spent the 950.00 on a set of ID725s. You live and learn I guess.
Here is a snap shot of the finished door panel and dont pay attention to my backwards number line...LMAO
http://i93.photobucket.com/albums/l5...ps195aba74.jpg
Those look great! Sorry to hear about your injector issues.
Thanks for the video, sounds just awesome!
It sure sounds great!
So I get to a computer that actually has sound and now the link is gone? Are you hiding it from us? Was that a teaser? It sure looked good with the pulleys turning and everything!