Threaded View
-
05-19-2013 11:30 AM #11
Yes, I'm quite familiar with those "straws" at the point!! Not sure where the gunk would have come from, the fuel spewing out of the line just below is clean, but pressing on the shrader does nothing but dribble a tiny bit of fuel. Weird!
I'm going to check it out now...."It is not much good thinking of a thing unless you think it out." - H.G. Wells
".......So sanded it all down and resprayed. ......" Been there. done that on a couple of paint jobs over the years. Usually took me a couple of days to get over being mad before I started...
Stude M5 build