Thread: 302 Stroker??

Tweet

And I did get the motor back in the car.. Glad about that!

A friend came by the shop and wanted to inspect for a noisy wheel bearing. What we determined tho, it was his newly purchased lug nuts on the alloy wheels. The "barrel" under the hex was bottoming out against the hub. Once he jacked up the first wheel, we thought it moved slightly so he grabbed it and gave it a shake. And it moved!! A couple seconds in the lathe 20 times got him in shape..

Then I wanted to install the lower pulley for the coupe and the lip that goes into the balancer was in the way 'cause the new balancer has a lip to carry the balancer! Back to the lathe for a trim job! Glad it's in and we're making progress.

Originally Posted by 34_40

And I did get the motor back in the car.. Glad about that!


Then I wanted to install the lower pulley for the coupe and the lip that goes into the balancer was in the way 'cause the new balancer has a lip to carry the balancer! Back to the lathe for a trim job! Glad it's in and we're making progress.

I don't see any pics.....how can we know you really did this????

Originally Posted by randyr

I don't see any pics.....how can we know you really did this????

I guess you'll have to trust me for now...
Or, you could hop a plane and check it out in person!?!?!

Originally Posted by 34_40

I guess you'll have to trust me for now...
Or, you could hop a plane and check it out in person!?!?!

Well, given those two choices I'll have to go with the former even though I'd like to do both. But I trust that knowing the potential repercussions, you'll take EXTRA pics next time you're in the shop, right??? Right???

Originally Posted by randyr

I don't see any pics.....how can we know you really did this????

Gotta agree, Randy....



useless_without_pics_2.gif.jpg

garfield_poster.jpg


.....c'mon Mike. You KNOW we have problems reading without pictorial aids


++++++++++++++++++++++++++++++++++++++++++++++++++++++++