Thread: Ford 302 Identification Help
Results 1 to 15 of 31
LinkBack URL
About LinkBacksThreaded View
-
11-20-2011 06:20 PM #14
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
your going dart SHP to get to 4.125 any way ?? wheeler .world.pbm. or less ford race block not sure how big on the bore on them . last 351 i did was a CID 445 .4.156 bore and 4.100 crank 6.200 rods AFR 225 heads and howards custom roller 750/720 268/278 lsa 112.. pac springs . they were hammering it with Nos and taking it to 9000 rpms
i told him to turn down the volume . i have a nice lower buck build done been sitting in the shop now for better then one year 289 with 302 flat tops cast pistons 040 over 351 stud rocker iron heads all fresh machine work erson hyd roller cam weiand intake .guy fell off the face of the earth
Last edited by pat mccarthy; 11-20-2011 at 06:31 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
It would be nice if this up and down crap would cease.
Back online