Quote Originally Posted by shawnlee28 View Post
Checked the float level and it looked very very close.........plenty high to fill the accel pump well and everything else is in the bottom of the float area...both jets and the main valve are at the bottom....valve seems free and so is the spring loaded rod that sits on it......

Thanks
Shawn,
IMO, float level is right or wrong, but never "close". The flow through the jets is due to the head of fuel in the bowls, and a very small difference in level makes a big difference in flow. Get a carb kit, take the carb apart and clean it thoroughly, and then re-assemble it according to the instructions, paying close attention to getting the float level dead on.