alright I went down to the shop to drop off my cut off valve cover so he could adjust the valves. an he had the carb apart. So he was showing me the internals of the carb needless to say the rear float was stuck open so the secondarys were always getting fuel which is why the car boged out an didnt want to idel that good. the carb its self had alot of crap in it. an the second thing was that the base plate that was used to adapt the carb to the intake wasnt big enough for the carb so it was sucking air from the front an the back of the carb. so hes machining a new base plate thats big enough for the carb to seal proper with a new gasket an hes rebuilding the carb an thats a pretty good start so far. he said This will be a whole new car when its all said an done. I asked him bout the stall converter an he said more then likely its stock but not to worrie too much about it. stock or not he said this thing should get up an go. so im all excited.