Thread: 350 build up
Threaded View
-
04-03-2007 02:16 PM #1
350 build up
i have a stock crank and rods but the block is bored over .30 and i have flat top pistons. If i put on a set of heads with 2.08 valves 49cc comb. chambers and 230cc intake runners matched up with a torker 2 intake with matching cam would this work ok?No body messes with the Night Rider
We did end up finding part of the problem, we did not put O-rings on the distributor shaft which was sending oil up the shaft instead of sending it to the lifters, adding O-rings quieted it down but...
New guy from Utah.