Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Dyno Guys
          
   
   

Results 1 to 15 of 39

Threaded View

  1. 02-11-2007 08:42 AM #34
    skids72's Avatar
    skids72
    skids72 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Dec 2005
    Location
    Lafayette
    Car Year, Make, Model: 68 Firebird 439 BBC
    Posts
    745

    I'm just using swept volume and tweaking combustion space (chamber+gasket+dome/dish+deck height) to get the target compression of 11.25:1 ... didn't want to make a dissertation of this or anything. BTW using a more realistic rod (6.1" for 1.525:1 ratio) makes 508hp/496tq in the simulation (not much difference).

    Thanks... I'm still pretty new to this and trying to learn most I can from you guys that have been there.

    -Chris

    DADNOVA - 700HP eh? Do you know intake lobe center line for that cam? I'm just plugging in numbers here. I'm treating your 292/302 as seat-to-seat duration. BTW I would be very surprised if you're making 1.6HP/ci in a stroker with 11.25:1 compression...
    Last edited by skids72; 02-11-2007 at 08:50 AM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink