Motor Type: Small block Chevy
Cubic Inches: 377 CID
Cylinder Head: '441 Casting Iron heads 76cc Combustion Chambers
Valves: 2.02/1.60
Exhaust: 3 inch 'X' pipe
Headers: Yes, not sure on size though.
Mufflers: Yes, 40 series flowmaster
Cam: Solid Roller, ".567/".567 int/exh 242/242@.050
Intake: Edelbrock Torker II Intake
Carb Type: Not sure, possibly looking at 750cfm holly double pumper or demon
Compression Ratio: estimated @ 10:1

The pistons are Probe forged flat top. The rods are forged 'H' beam. The crank is Scat cast steel. Block is 4 bolt 400 SBC. Cam is Chet Herbert Performance. Valve train is Renegade Racing. Cam is on a 110 degree lobe center.

I appreciate anyone who will take the time to help me out here. If you need anymore information, just ask. I will provide