Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 402bbc build cam question
          
   
   

Results 1 to 5 of 5

Threaded View

  1. 05-08-2015 05:24 PM #5
    Iowa
    Iowa is offline CHR Member
    Visit my Photo Gallery
    Join Date
    May 2015
    Location
    Wichita
    Posts
    11

    O yea I did run a comp 11-207-3 .224/.224 .510/.510 just a hydraulic lifter and it was the first cam i put in the moter. It ran horrible but I did have edelbrock 600 carb 2.73 gears 8.5 compression block was not torque plate honed or decked like the combos above were I can tell you first hand it makes a difference. Poor idle no power.
    Last edited by Iowa; 05-08-2015 at 05:30 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink