Well, the motor started the eat a couple lobes. I called Lunati and they have been more than helpful. They are going to apply the cost of the original cam to a retro-roller cam. Need some input for a camshaft. I am looking at a voodoo 60211. Anybody used one? How was the responsiveness/power off idle-1400? I know it will make good power at 1800+, but I wanna make sure it will still be street friendly. It is going in a 5200lbs Jeep Scrambler w/ 781 heads, RPM air-gap, backwards 850CFM QJ, 9.8:1 static compression.

Specs 60211:
# Advertised Duration (Int/Exh): 272/280
# Duration @ .050 (Int/Exh): 221/229
# Gross Valve Lift (Int/Exh): .575/.575
# LSA/ICL: 112/106
# Valve Lash (Int/Exh): Hyd/Hyd
# RPM Range: 1800-5500