Thread: 468 camshaft selection

Tweet

How bad are solids to set up versus hydraulic. And at what price? I am all outa money on this build now, lol. I have never used anything other than hydraulic flat tappets to tell you the truth. Another question, why is the powerband so short on the 60211? nature of the beast? I got lucky on my springs, Lunati told me I can use the entry level springs that I got with the 60202 with the 60211. They also told me I MIGHT be able to reuse the pushrods I have, but I will not know for sure till I get em in.
Clay

Originally Posted by jeepman1320

How bad are solids to set up versus hydraulic. And at what price? I am all outa money on this build now, lol. I have never used anything other than hydraulic flat tappets to tell you the truth. Another question, why is the powerband so short on the 60211? nature of the beast? I got lucky on my springs, Lunati told me I can use the entry level springs that I got with the 60202 with the 60211. They also told me I MIGHT be able to reuse the pushrods I have, but I will not know for sure till I get em in.
Clay

well your push rods will not work with a hyd roller lifter must of been talking to a guy that was pushing a broom ? your push rods may work only with a solid roller as they have no valveing in them and body s are sometimes shorter .the cam will be short has it has a small dur cam . as for hyd roller lifters your looking at $290 and up the solid is not hard to set up you can pm if you want i will give you my phone number and tell you what i have and what you need to know for hyd roller or solid roller cam