Threaded View
-
01-20-2019 05:19 PM #6
In this picture you posted. You need to remove the bolt that seen top center. The use a hammer and drift and slide out the retainer with spring. Then you can lift out the caliper.
Wire Wheel, Wire brush what ever you got - clean it up all the sides and use plenty of never sieze during reassembly.
I also wonder if your wheel studs aren't a problem. Looks like they are "un threading"?? Are they loose?Last edited by 34_40; 01-20-2019 at 05:24 PM.
Thanks for the inputs guys !
Exhsust system