Quote Originally Posted by DA34GUY View Post
Roger is right, ya need about 1/16 play, as I said B4 put a return spring on it and be done with it !!!!!!


What I don't understand is how a guy could get the rod to come out of the cup in the back side of the piston with only 1/16" of play, given the strong internal spring in the MC pushing the piston spool back against the rod. I suppose the answer may be that when the new MC was installed the rod was off center, depressing the piston about 3/8", and wasn't noticed? If you didn't disconnect the rod from the pedal it wouldn't be that hard to do, and it's about the only thing that makes sense to me. If that's the case I'd say it's fixed.