Thread: Start Control Options
Hybrid View
-
06-27-2010 07:49 AM #1
I have an RFID keyless ignition kit sold by Flaming River that I am going to install in a week or two.
(click for link)
When you sit in the driver's seat with the key fob in your pocket, all you have to do is push the start button.
Last year I did a different push button starter that didn't use an RFID key fob. It was a Watson's "Hot Dot".
(click for link)
For security, I also wired it with a remote control battery shut down solenoid.
Like one of these (click) except I triggered it with a Dakota Digital remote control system (which was wired to be hot even when the battery disconnect was open).
Hope this helps...
-
06-27-2010 09:24 AM #2
Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
-
06-27-2010 03:09 PM #3
After browsing through the Watson's website, I see that they too offer an RF enabled keyless ignition system to work in conjunction with their Hot Dot ignition switch system. All tolled it's $380, which is about half of what Flaming River gets for their system, plus Watson's has a better looking switch.
http://www.watsons-streetworks.com/i..._switches.html
Joe
-
06-27-2010 03:22 PM #4
Joe,
That is super cool!! I was just getting into the Watson's site but had not found their RF system yet. I will likely order one before I get started on wiring. Once again, thanks for the guidance!Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
-
07-15-2010 09:14 AM #5
Some bad news on Watson's SureLock. Their distributor elected to stop supply of the entire product line, and they no longer have a RF system. Their one button start is still an option, but security is limited to some type of switch to interrupt the ground circuit, or one of their remote actuated (hard wired) power disconnect switches. Looks like the only aftermarket RF system is Flaming River's, unless someone else knows of another.Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
".......So sanded it all down and resprayed. ......" Been there. done that on a couple of paint jobs over the years. Usually took me a couple of days to get over being mad before I started...
Stude M5 build