Hybrid View
-
03-11-2009 09:08 PM #1
Stovebolter, in the inside of bed on the rear corners,are panels ,remove those
and you will be able to get to the chrome bed corners,get putty knife and lift
the bed rails just enough to spray WD every 6or8 inches,on both sides,
they will slide out the back,that way you don't mess up the clips and reuse them..the chrome on the top are held buy bolt so you do have to remove
the rear of the headliner,if you use a steamer if will losen the glue enough
that you can carefully peel it back,, James..
-
03-12-2009 06:04 AM #2
Well thank you everyone. You've save me some grief I assure you. I'll be careful and take my time.....saving the trim. I'm guessing this stuff can be sent to be re-chromed? Assume its all aluminum with a chrome finish.
Dave GDo not lift a rock only to drop it on your own foot 






LinkBack URL
About LinkBacks
Reply With Quote
Either return this forum to what was or get the HELL OUT!
Dead!