Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: ford 9" with moser 31 spline axles is leaking oil inside the drum brake!!! need help
          
   
   

Results 1 to 11 of 11

Threaded View

  1. 03-03-2009 09:20 AM #5
    hottrodd57
    hottrodd57 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Mar 2005
    Location
    north salem
    Car Year, Make, Model: 39 chevy coupe,57 bel-air, 67 gto
    Posts
    196

    Quote Originally Posted by Dave Severson View Post
    Couple questions first.... Is the rear end possibly overfilled, and does it have a good vent system???? The only time I've had a leakage issue with the O-Rings is when the rear end is a bit too full, or the seal was damaged during installation.... A light coating of wheel bearing grease on the outside of the bearing and O-Ring during installation is usually sufficient.
    YES, IT HAS A FACOTRY STYLE VENT TUBE, i MAY HAVE OVERFILLED IT?, IT AS A FILL HOLE ON THE PUMPKIN, FILLED READEND UNTIL IT CAME UP TO THE BOTTOM OF THE FILL HOLE,
    Last edited by hottrodd57; 03-03-2009 at 09:23 AM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink